By Robin on June 4, 2017
I’m heading back to the Alps for the summer season now, and looking forward to it! There are photos of the winter and spring we just had on my new Instagram feed, and one here of Tim in the Combe de l’Encrenaz. And I’ve uploaded more to Flickr. Have a great summer and hope to see you on the hill soon!
By Robin on May 9, 2014
Over the May Bank Holiday Weekend I was on Dow with Karl on Saturday and in Sandbed Ghyll with Kevin on Sunday. The ghyll was an “interesting” trip that I haven’t done in a long while. Very slippery in places! Tomorrow it’s off to Skye for a week with John and Nick. Let’s hope the weather picks up a bit!
By Robin on April 22, 2014
The highlight of my spring was certainly the few weeks I took out from our biomass boiler project to ski and climb in the Alps! Kevin and Billy came to Chamonix for a week in late March to check out the Alps for the first time and did some introductory snowshoeing and mountaineering. The excellent spring conditions suited them well, and with low avalanche risk and fantastic spring snow conditions being the rule (with powder as well at times) we had a great time skiing too. Rebekah and I did a couple of good day tours and also several days around the lift system. Then Louise came out for a weeks intro ski touring and enjoyed fantastic conditions and weather. I was fortunate to team up with Charlie Boscoe, Matt Livingstone, Phil and Nora for a couple of fun days skiing before heading back to the UK.
I’m out again tomorrow in the Lakes with John and Nick. We have a trip to Skye planned for May ahead of the summer alpine season, where my bookings start in early June.
I still have dates available during the spring and summer, but my diary is filling up and the framework is now in place. Please contact me if you are hoping to head for the hills this year!
By Robin on January 9, 2014
My friend Nuru Sherpa emailed me recently asking me to offer places on a trip he is organising to the North side of Everest. Nuru is exceptionally strong and experienced, having led Sherpa teams on a huge number of professional expeditions to the Himalaya. He is also very widely travelled, and we met up a couple of times last summer near Zermatt where he was working in the Matterhorn Hut for the whole season. If you have the necessary experience and are interested in joining Nuru on Everest in the forthcoming season drop me a line!
By Robin on January 1, 2014
This book of dreams was one of my top Christmas presents. Highly recommended!
Happy New Year!
By Robin on December 26, 2013
This year we spent Christmas Day cycling from home in the Lakes, and Sophie and Charley (creator of my website) are staying out in our flat in Les Houches, taking advantage of the alpine climbing conditions and doing a spot of bivouacking as well by all accounts. Wherever you are spending it, we hope you are having a very Happy Christmas and send you our very best wishes for 2014!
By Robin on November 25, 2013
Here’s a can’t miss TV program coming up shortly for anyone interested in the Scottish winter mountain scene. Mark Diggins of SAIS has this to say:
By Robin on November 24, 2013
Today I attended the BMG AGM CPD Day. This was the first Risk Management Seminar to be held with the support of the memorial fund set up following the death of ex-BMG President Roger Payne on Mont Maudit in 2012. The seminar was structured around the theme of “Risks in Mountain Guiding” and the aim is to help members of the Association better understand and manage the risks associated with the profession.
By Robin on November 17, 2013
Together with Jim Blythe I delivered the free BMG Arc’teryx workshop on Alpine Ropework at Kendal Wall yesterday. All sessions (Alpine Ropework, Dry Tooling and the Big Wall Portaledge Experience) were fully subscribed and the participants all very appreciative and enthusiastic. The BMG workshops were kindly supported by Arc’teryx, who also supplied the Guides with t-shirts and Atom LT Hoodys. The Atom LT is an amazingly lightweight yet warm jacket and is a close fit, but large stretch side panels allow excellent freedom of movement. Looks like it will be brilliant in action on the hill. Many thanks to Arc’teryx once again for their support.
By Robin on November 2, 2013
Yesterday I took part in a bolt placement training and work day at Cathedral Cave, Little Langdale. The day was led by Dan Robinson who is the Chair of Cumbria Bolt Fund and trained, experienced and also pretty passionate about the appropriate placement of bolts. His aims are to renew existing bolt protection on climbs where considered necessary for safety, and to place bolts that will reduce the impact of climbers and outdoor groups on the crag environment.
We started with a briefing session from Dan, and an inspection of some of the old fixed gear that had been removed demonstrated the obvious safety issues it presented. This led on to an introduction to the gear currently available and commonly clipped by all of us.
The bolt of choice being deployed in Cumbria is the twisted leg P bolt manufactured by Bolt Products These are stronger than the alternatives, have a very long service life and when they require replacement they can be removed and the same drilled hole re-used for the new bolt. However, as we found out during the course of the day, a controlled environment and plenty of time is required to fix these bolts. The holes need to be prepared by drilling, cleaning with air and water, drying and it’s best to actually glue the bolts in batches for efficient use of the resin. Also the temperature needs to be above 4C.
Expansion type bolts are in use all over the Alps and elsewhere, and they can be placed in situations where it might be impractical to use the glue in products. They can however require core drilling to remove the fixings when they need replacement, and this is very costly and time consuming. The alternative is to leave the old bolt fixing in the rock and drill a fresh hole for the replacement. Repeated drilling of the rock is clearly undesirable, and where space is limited or the position of the bolt is critical, core drilling might be essential.
The old bolt protecting the crux of Darklands was loose and removed by hand, a reminder to check the fixed gear when climbing! Look out for glue in bolts that have come loose and for corrosion of expansion bolt fixings. Corrosion commonly occurs behind the hanger close to the surface, where water can accumulate and air is present. Check for rusty bolt heads, and even expansion bolts that were never intended for climbing being used, sometimes in conjunction with branded hangers. This Petzl webpage is worth a read if you are heading off cragging in a tropical marine location this winter!
During the course of the day we achieved all our objectives, which were:
– An AMI CPD workshop
– Equip the top of the big abseil with belay bolts to prevent further damage to the trees and facilitate optimal set up when multiple groups are present, and also to encourage abseiling away from the line of Basilica. Minor improvements were also made to the ground surface at the top of the crag.
– Replace a key bolt on Darklands that was previously rotating and was removable by hand.
– Mark positions for replacement bolts on Basilica.
The day provided a very useful insight, understanding and appreciation into the work being carried out on our behalf. Many thanks to all involved!
More photos here.
In addition to my Journal entries I post photos to my Facebook Page whenever I go out on the hill.
Please 'like' my website and share a link to it on your Facebook wall by clicking the link at the foot of this page!
Please also click below to visit my Facebook Page, where you can 'like' my page and see the regular photo updates!Click here
Please 'like' my site by clicking here!
© Robin Beadle, 2011 - Website designed by Medium Rare Digital